Filter
Top Products
50 MultiModemISI Hybrid Series, ISIHI-2S
Chapter 3—Software/Driver Installation
ConfigMenu Configuration Utility
Use the ConfigMenu configuration utility with computers using DOS or Windows 3.x
operating systems. ConfigMenu is installed in the TAs as part of the firmware.
To use ConfigMenu:
1. Start a data communication program and select the COM port where the TA is
connected.
2. In the communication program dialog box, type AT@Config and press ENTER.
ConfigMenu’s Main Menu appears (see screen below).
3. To select menu item, type its number and press ENTER. A submenu then appears
where you can make selections. At the lowest level, you can change a configuration
option by selecting a number or typing a value and pressing ENTER.
4. When you finish, close ConfigMenu.
5. Use the &W command to save your new configuration and to load it automatically
when the TA is turned on.