Filter
Top Products
Maintenance_ 51
7. Reconnect the support and the control panel and then close the control panel firmly until it clicks into place.
Cleaning the drum
If there are streaks or spots on your machine, the OPC drum of the cartridge may require cleaning.
1. Before setting the cleaning procedure, make
sure that paper is loaded in the machine.
2. Press Menu until Maintenance appea
rs.
3. Press the left/right arrow until Cle
an Drum appears and press OK.
4. Press the left/right arrow until On appears and pr
ess OK.
The machine prints a cleaning page. Toner particles on the drum surfa
ce are affixed to the paper.
5. If the problem remains, repeat step 1 th
rough 4.
Storing the Toner cartridge
Toner cartridges contain components that are sensitive to light, temperature, and humidity. Muratec suggests users
follow the recommendations to ensure the optimum performance, highest quality, and longest life from your new Muratec
toner cartridge.
Store this cartridge in the same environment as the printer it will be used in; this should be in controlled office temperature
and humidity conditions. The toner cartridge should remain in its original, unopened package until installation – If original
packaging is not available, cover the top opening of the cartridge with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful shelf and operating life. Do not store on the
floor. If the toner cartridge is removed from the printer, always store the cartridge:
• Inside the
protective bag from the original package.
• Store lying flat (n
ot standing on end) w
ith the same side facing up as if they were installed in the machine.
• Do not store consumable in;
- Temperature greater than 40°C (104°F).
- Humidity
range less than 20
% nor greater than 80%.
- An environment with extreme changes in humidity or
temperature.
- Direct sunlight or room light.
- Dusty places.
- A car for a long period of time.
- An environment wh
ere corrosive gases ar
e present.
- An environment with salty air.
Handling instructions
• Do not touch the surface of the photosensitive drum in the cartridge.
• Do not expose the cartridge to unnecessar
y vibrations or shock.
• Never manually rotate the drum, especially in the reverse direction; this can cause inter
nal damage and toner spillage.
Use of non-Muratec and refilled toner cartridge
Muratec does not recommend or approve the use of non-Muratec brand toner cartridges in your printer
including generic, store brand, refilled, or remanufactured toner cartridges.
Muratec's warranty does not cover damage to the machine caused by the use of a refilled, remanufactured,
or non-Muratec brand to
ner cartridge.
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the amount of toner that print jobs require. The
actual print-out number may vary depending on the print density of the pages you print on, operating environment, printing
interval, media type, and/or media size. For example, if you print a lot of graphics, the consumption of the toner is high and
you may need to change the cartridge more often.