Muratec F-116 All in One Printer User Manual


 
Safety information_ 6
Caution
Operating method
Caution
If the machine gets overheated, it
releases smoke, makes strange
noises, or generates an odd odor,
immediately turn off the power switch
and unplug the machine.
This could result in electric shock
or fire.
During an electrical storm or for a
period of non-operation, remove the
power plug from the electrical outlet.
This could result in electric shock
or fire.
If the plug does not easily enter the electrical
outlet, do not attempt to force it in.
Call an electrician to change the electrical
outlet, or this could result in electric shock.
Be careful, the paper output area is hot.
Burns could occur.
Do not allow pets to chew on the AC power,
telephone or PC interface cords.
This could result in electric shock or fire.
If the machine has been dropped, or if the
cabinet appears damaged, unplug the machine
from all interface connections and request
assistance from qualified service personnel.
Otherwise, this could result in electric shock
or fire.
If the machine does not operate properly after
these instructions have been followed, unplug
the machine from all interface connections and
request assistance from qualified service
personnel.
Otherwise, this could result in electric shock
or fire.
If the machine exhibits a sudden and distinct
change in performance, unplug the machine
from all interface connections and request
assistance from qualified service personnel.
Otherwise, this could result in electric shock
or fire.
Do not forcefully pull the paper out
during printing.
It can cause damage to the
machine.
When printing large quantities, the
bottom part of the paper output area
may get hot. Do not allow children to
touch.
You may be burned.
Be careful not to put your hand
between the machine and paper
tray.
You may get injured.
When removing jammed paper, do
not use tweezers or sharp metal
objects.
It can cause damage to the
machine.
Do not block or push objects into the ventilation
opening.
This could result in elevated component
temperatures which can cause damage or fire.
Do not allow too many papers to stack up in the
paper output tray.
It could cause damage to the machine.
Use care to avoid paper cuts when replacing
paper or removing jammed paper.
You may get hurt.
This machine's power interception device is the
power cord.
To switch off the power supply, remove the
power cord from the electrical outlet.