Muratec F-116 All in One Printer User Manual


 
Troubleshooting_ 64
Page skew Ensure that the paper is loaded properly.
Check the paper type and quality (See "Print media specifications" on page 71).
Ensure that the guides are not too tight or too loose against the paper stack.
Curl or wave
Ensure that the paper is loaded properly.
Check the paper type and quality. Both high temperature and humidity can cause paper
curl (See "Print media specifications" on page 71).
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Wrinkles or creases
Ensure that the paper is loaded properly.
Check the paper type and quality (See "Print media specifications" on page 71).
Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Back of printouts are
dirty
Check for leaking toner. Clean the inside of the machine (See "Cleaning the inside" on
page 48).
Solid Color or Black
pages
The toner cartridge may not be installed properly. Remove the cartridge and reinsert it.
The toner cartridge may be defective. Remove the toner cartridge and install a new one
(See "Replacing the toner cartridge" on page 68).
The machine may require repair. Contact a service representative.
CONDITION SUGGESTED SOLUTIONS
AaBb
C
AaBb
C
AaBb
C
AaBbC
AaBbC
c
A