Filter
Top Products
68 _Maintenance
MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts,
and to maintain your machine in top working condition the following
condition, the following items will need to be replaced after the specified
number of pages, or when the life span of each item has expired.
We highly recommend that this maintenance be performed by an authorized
service provider, dealer or the retailer where you bought the machine. The
warranty does not cover the replacement of the maintenance parts after
their lifespan.
Checking replaceables
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed or scanned. Replace the
corresponding parts, if necessary.
1. Press Menu until System Setup appears on the bottom line of the
display and press OK.
2. Press the left/right arrow until Maintenance appears and press OK.
3. Press the left/right arrow until Supplies Life appears and press OK.
4. Press the left/right arrow until the item you want appears and press OK.
• Supplies Info: Prints the supply information page.
•Total:Displays the total number of pages printed.
• ADF Scan: Displays the number of pages scanned using the ADF.
•Platen Scan:Displays the number of pages scanned using the
scanner glass.
• Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray
Roller: Displays the number of pages printed each item.
5. If you selected to print a supply information page, press OK to confirm.
6. Press Stop/Clear to return to ready mode.
Replacing the DADF rubber pad
You will need to replace the DADF (or ADF) rubber pad when there seems to be
a consistent problem with paper pickup or when its specified yield is reached.
For the ADF
(CLX-6200FX only)
1. Open the ADF cover.
2. Rotate the bushing on the right end of the ADF roller toward the ADF
and remove the roller from the slot.
3. Remove the ADF rubber pad from the ADF, as shown.
4. Insert a new ADF rubber pad into place.
5. Align the left end of the ADF roller with the slot and push the right
end of the roller into the right slot. Rotate the bushing on the right
end of the roller toward the document input tray.
6. Close the ADF cover.
ITEMS YIELD (AVERAGE)
Fuser unit Approx. 100,000 pages
DADF friction pad Approx. 20,000 pages
DADF pick-up roller Approx. 80,000 pages
Pick-up roller (Multi-purpose tray,
FCF
a
, Optional tray 2)
a. First cassette feeder (Tray1)
Approx. 70,000 pages
Friction pad (Multi-purpose tray,
FCF, Optional tray 2)
Approx. 70,000 pages