Filter
Top Products
Appendix A - menu system > 146
Fax Setup
a
(cont.)
Other Settings Redial Tries 2 time(s) Set the number of
redial attempts.
Range: 0 - 10 time(s)
Redial Interval 1 minute(s) Set the time between
redial attempts.
Range: 0 - 5
minute(s)
Forced Memory Rx
Setting
I.D.Code
OFF
user defined
Block Junk Fax
Setting
Registered List
OFF
select from list
Can prevent
unnecessary fax
reception.
Ring Response 1 Ring Enter the number of
rings required before
receiving an incoming
fax.
Dialling Pause Duration 2 second(s) Enter the pause
duration required.
Range: 0 - 10
second(s)
Rx Reduc. Rate Auto Select the Rx
reduction rate.
Reduc. Margin 24 mm Select the reduction
margin.
Range: 1 - 100 mm
ECM Mode ON Error correction mode
(ECM) automatically
detects and corrects
errors in the fax
transmission process
that are sometimes
caused by telephone
line noise.
Prefix user defined Enter the require
dialing prefix (if you
are connected via a
PBX then you need to
enter a prefix to
obtain an outside line
connection).
Received Time Stamp OFF Set to ON if you want
the time stamp
printed on incoming
faxes.
Print Check Message ON If enabled, when a
transmission error
occurs the error
content is reported.
ITEM OPTION DEFAULT VALUE/DESCRIPTION