Muratec MFX-C2700 All in One Printer User Manual


 
Faxing > 74
Manual feed
If you wish to send multiple sets of documents from the ADF or flatbed, enable the
“continuous scan” feature. Refer to “Continuous scan mode” on page 94 for full details.
Fax Functions
(cont.)
TTI ON, OFF Prints the sender name on the header of the
transmitted fax. By default, the name you
specified in Sender ID is printed. Refer to
“Sender ID” on page 143.
TTI Select user defined Select the user defined TTI header.
Note: TTI must be ON.
Transmit
Confirmation
Report
ON, OFF Select ON to print a fax confirmation after
transmission.
Delayed Tx OFF
Date
Time
Delayed transmission allows you to fax
documents at a specific date and time.
Up to one hundred transmission times can be
scheduled up to one month in advance.
Fcode Polling ON, OFF To turn ON, use the numeric keypad to enter
the sub-address of the remote machine.
If required, use the numeric keypad to enter
the password of the remote machine.
Fcode Tx ON, OFF F Code transmission is a function to
communicate using sub addresses or
passwords in accordance with the standard of
ITU-T. by creating and registering F Code
boxes you can execute confidential
communication and notice board
communication.
Use the numeric keypad to enter the sub-
address.
If required, use the numeric keypad to enter
the password of the remote machine.
Note: up to 20 F code boxes can be
registered, Up to 30 documents can be stored
in one box.
Note: Polling and FPolling must be OFF.
Memory Tx ON, OFF Select OFF to enable real time transmission,
i.e. fax transmission synchronisation with
scanning.
Fax Job View/
Cancel
View or cancel a reserved fax job from the
list.
Fax History Tx History Check the transmission or reception history
and results of a fax job.
Rx History
FEATURE OPTION DESCRIPTION