National Instruments AT E Series Network Card User Manual


 
Appendix A Specifications for AT-MIO-16XE-50
© National Instruments Corporation A-37 AT E Series User Manual
Physical
Dimensions
(not including connectors) ..................... 33.8 by 9.9 cm
(13.3by3.9in)
I/O connector.......................................... 68-pin male SCSI-II type
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth..................................... 42 V, Installation Category II
Channel-to-channel ................................ 42 V, Installation Category II
Environmental
Operating temperature............................ 0 to 55 °C
Storage temperature ...............................20 to 70 °C
Humidity ................................................ 10 to 90% RH, noncondensing
Maximum altitude.................................. 2,000 meters
Pollution degree (indoor use only).........2
Safety
The DAQ device meets the requirements of the following standards for
safety and electrical equipment for measurement, control, and laboratory
use:
EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
UL 3101-1:1993, UL 3111-1:1994, UL 3121:1998
CAN/CSA c22.2 no. 1010.1:1992/A2:1997