Filter
Top Products
CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 115
NDA-24345, Issue 3
Caller ID Display
Without answering incoming calls or held calls which terminate to the line keys of a Multiline
Terminal, the calling party's information can be confirmed by the indications on the LCD.
Caller ID Station
This feature enables a user to connect analog telephones with Caller ID display function, and
provides the calling party’s number and name on the display without answering incoming calls.
Camp-on
This feature provides selected stations or outside calls with Camp-On capability to a busy internal
station. Two Camp-On methods are provided. The call waiting method allows a station or an outside
party to camp itself on to a busy station. The transfer method allows a transferred outside call to be
camped-on to a busy station.
Centrex Compatibility
A combination of features allows full integration of the NEAX2000 IPS with Centrex service.
Check In / Check Out
When this feature is activated, the following operations occur:
• Check In
• Room Cutoff is cleared.
• Check Out
• Room Status printout is supplied.
• Do Not Disturb is reset.
• Room Cutoff is set.
• Message Waiting is reset.
• Automatic Wake Up is cleared.
CID Call Back
When an Incoming Call is terminated from a Station and Trunk with Caller ID (Calling Number
Information), and the Called Station does not answer, the Calling Number is registered to the system
memory and MW Lamp is lit. After the Calling Number is registered, by operating from a Station,
Confirmation, Delete, or Call Back is available. When the Called Station answers, the Calling
Number is also registered to the Last Number Redial Memory. The Station can search and call back
to that number by the operation of the Last Number Redial/Stack Dial feature.
CID Call Routing
This feature allows designating a call terminating system based on the Calling Party Number
received from the network.
Class of Service
This feature permits all stations to be assigned a Class of Service in accordance with the degree of
system use desired. The Class of Service is used to assign restrictions for trunk access and feature
access.
Code Restriction
This feature allows the NEAX2000 IPS to be programmed to restrict outgoing calls according to specific area
and/or Central Office codes. This restriction is controlled on the basis of a three-digit area code or six-digit
area and office code numbering plan.