Filter
Top Products
CHAPTER 1 INTRODUCTION
NEAX 2000 IPS General Description Page 18
NDA-24345, Issue 3
NEAX
®
2000 IPS
DM
The NEAX IPS
DM
(Internet Protocol Server Distributed Model) is equipped with all the features and
functions of the NEAX 2000 IPS, with a smaller space requirement. It is a full-featured PBX that
supports advanced networking, pure peer-to-peer IP telephony connectivity and traditional TDM
switching capabilities. Designed primarily for pure converged IP networks, the NEAX IPS
DM
can
also accommodate a mixed (i.e., TDM and IP) converged IP network or standalone solution.
The NEAX IPS
DM
supports up to 956 peer-to-peer IP stations and 40 TDM ports in a single modular
chassis. Up to three chassis can be stacked providing maximum capacity of 120 legacy TDM ports
while still supporting as many as 828 peer-to-peer IP stations or more depending on the amount of
TDM stations used. It uses the same CPU, line/trunk cards, application processor cards and software
of the NEAX 2000 IPS and comes equipped for 19” rack mounting. It offers superior port density;
each chassis only occupies two Rack Units (2RU).
Characteristics of the NEAX IPS
DM
Compact and Small Size MODULAR CHASSIS
One MODULAR CHASSIS provides 6 card slots /40LT ports and up to 3 MODULAR CHASSIS
can be used per system. (24 virtual LT ports are available per MODULAR CHASSIS in addition to
40LT ports.)
2 types of MP (Main Processor)
MP can be selected from the following options by customer requirements.
• PN-CP24-A for IPS
DM
, the same MP as the NEAX 2000 IPS.
• PN-CP31-A for IPS
DMR
, the following functions are removed from the CP31: DAT / DK00 /
1 RS232C Port for MAT / MN Alarm Indication
Power Failure Transfer (PFT)
Power Failure Transfer (PFT) for the IPS
DM
is provided with PZ-4PFTA card. The PZ-8PFTB for
the NEAX 2000 IPS is not available for the IPS
DM
.
IPS
DM
Installation Methods
Wall Mount Installation is not available. The NEAX IPS
DM
can be installed on the desktop or into
the 19-inch rack.