Filter
Top Products
CHAPTER 5 FEATURE DESCRIPTION
Page 146 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Last Number Redial-PS
This feature enables a PS to store the numbers dialed in the previous five calls including the last
number dialed. The stack dial numbers are sequentially displayed on the LCD, allowing the station
user to make an outgoing call by selecting the desired dialed number from the display.
Multi-Line Operation-PS
PS equipped with two line keys, L1 key and L2 key, and different station numbers can be assigned to
each of two lines. The number assigned to L1 key of the PS is called My Line and the other number
assigned to L2 key is called Sub Line. My Line and Sub Line of a PS can be assigned to appear on
the Flexible Line Keys of a Dterm and the Dterm can share the PS lines.
Multi-Site Roaming
PS user can originate or receive a call in any place of a network provided by the plural PBXs which
are interfaced by JT-Q931-a.
NEAX2000 IPS Wired for Wireless
This feature allows the NEAX2000 IPS to have the Wireless PBX feature. NEAX2000 IPS provides
several integrated features adding on the adjunctive configuration.
Number Sharing
This feature allows the Dterm user to have a PS as Sub Station and to get service with one telephone
number. In case that one user has both Dterm and PS, with this feature used, the user is not required
to have separate two telephone numbers.
- When user is at his desk, a call is terminated to Dterm.
- When user leaves his desk with PS, a call is automatically terminated to PS.
In this feature, the Dterm and PS are referred as Main Station and Sub Station, respectively.
Out of Zone Indication
When a PS user moves out of the service area and the electric field strength becomes weak, this
feature notifies it to the user with the warning tone and the LCD display.
Overlap Dialing
This feature allows a PS user to receive dial tone and dial the desired number to originate a call.
Preset Dialing
This feature allows a PS user to confirm the number to be dialed before originating a call.
PS Authorization
This feature is to confirm the identity of a PS to avoid an unauthorized PS from accessing the
system.
PS Location Indication
This feature is when PS calls a Multiline Terminals/Attendant Console or vice versa, this feature
allows indicating the location name of the ZT that is connected to the PS on the LCD of the Multiline
Terminal.
PS Location Registration
This feature allows the WCS to supervise the location of each PS, upon receiving the location
registration request, to allow call termination.
Q.931a Roaming over IP Trunk
PS user can originate or receive a call in any place of a network provided by multiple PBXs that
communicate by JT-Q931a protocol over IP Trunks (IPT+VCT) or Peer to Peer Trunks.