Filter
Top Products
CHAPTER 5 FEATURE DESCRIPTION
Page 140 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Dual Hold – CCIS
This feature allows two connected Multiline Terminals to be placed on hold simultaneously over the
CCIS link. This enables the held parties to answer or originate a call from a secondary extension or
the idle primary extension.
Elapsed Time Display – CCIS
This feature provides an LCD which shows the duration of time that a Multiline Terminal is
connected to any trunk through the CCIS network.
Flexible Numbering of Stations – CCIS
This feature allows voice and data station numbers to be assigned to any instrument in the CCIS
network, based solely upon numbering plan limitations.
Hands-Free Answerback - CCIS
This feature allows a Multiline Terminal station user to respond to a voice call, through the CCIS
network, without lifting the handset.
Hot Line – CCIS
This feature allows two stations, at different nodes in the CCIS network, to be mutually associated on
an automatic ringdown basis through the CCIS network.
House Phone – CCIS
This feature allows selected stations to call an Attendant Console, through the CCIS network, simply
by going off hook.
Incoming Call Identification - CCIS
This feature allows an Attendant to visually identify the type of service and/or trunk group which is
arriving or waiting to be answered at the Attendant Console through the CCIS network.
Individual Attendant Access – CCIS
This feature permits a station user to call a specific Attendant Console, in the CCIS network, using
an individual Attendant Identification Number.
LDN Night Connection – CCIS
This feature routes Listed Directory Number (LDN) calls to a pre-selected station, in the CCIS
network, when the Night mode has been entered.
Link Alarm Display - CCIS
This feature provides an indication on external equipment when the CCIS link is
connected/disconnected, when the system is initialized, or when the CCH is in make-busy.
Link Reconnect - CCIS
This feature provides the system connected to CCIS network with the capability to release the
redundant CCIS link connection and re-connect the link within the system for efficient usage of the
CCIS links.
Message Waiting Lamp Setting - Attendant – CCIS
This feature allows an Attendant, in the 2400 IPX, to set or cancel a Message Waiting lamp
indication, through the CCIS network, on a station in 2000 IPS.
Message Waiting Lamp Setting - Station – CCIS
This feature allows a station user, in the 2400 IPX, to set or cancel a Message Waiting lamp
indication, through the CCIS network, to a station in 2000 IPS with this feature.