Filter
Top Products
CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 127
NDA-24345, Issue 3
Music on Hold
This feature plays music when a line is placed on hold. Music is provided by a circuit board memory
chip, IP adpter, or a local music source, such as a CD player or a radio.
Night Service
This feature provides a variety of methods for handling incoming calls when the system is in night
mode. These include:
• Attendant Night Transfer
• Call Rerouting
• Day/Night Mode Change by Attendant Console
• Day/Night Mode Change by Station Dialing
• Night Connection-Fixed
• Night Connection-Flexible
• Trunk Answer Any Station
Attendant Night Transfer
When the Attendant Console is in Night Service, any operator directed calls (dial 0 calls) are
automatically routed to a preprogrammed station. Priority Calls and Off-Hook Alarms which
terminate to an Attendant are also routed by this feature.
Call Rerouting
This feature provides flexible reroute capabilities for a variety of calls when the system is in
night mode.
Day / Night Mode Change by Attendant Console
This feature provides activation of DAY/NIGHT Mode Change by depressing a predetermined
key from the Attendant Console.
Day / Night Mode Change by Station Dialing
This feature allows selected stations to activate a change from day mode to night mode by
dialing a special code.
Day/Night Mode Change by System Clock
This feature provides automatic activation of Day/Night Mode Change by using System Clock.
Night Connection - Fixed
This feature allows incoming calls normally terminated to the Attendant to reroute to a
predetermined station when the system is placed in Night Service.
Night Connection - Flexible
This feature provides incoming calls normally terminated to the fixed night station to be Call
Forwarded to another station.
Trunk Answer Any Station (TAS)
This feature allows any station, other than one with incoming restrictions, to answer incoming
calls when the system is in the night mode. When this feature is activated, incoming exchange
network calls will activate a common alert signal at the customer premises. By dialing a
specified code, any station may answer the call and then extend it to any other station by means
of the Call Transfer feature.