Filter
Top Products
CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 125
NDA-24345, Issue 3
Message Center Interface (MCI)
This feature provides an interface with a customer supplied Voice Mail System (VMS) that can send
Message Waiting lamp control data to the system. The Message Center Interface (MCI) can provide
the following operations:
1. When terminating the call to the VMS, the system sends call connection status information to
the VMS through the MCI.
2. The VMS sends the Message Waiting Lamp on data to the MCI.
3. The system, upon receiving this control data from the MCI, illuminates the Message Waiting
lamp of the corresponding station.
4. The VMS, upon receiving retrieved message information, will send the Message Waiting
lamp control data requesting the system to extinguish the Message Waiting lamp of the
corresponding station.
Message Registration
This feature provides output from the system to a call accounting system using an RS-232C
connector. This allows the Hotel/Motel clerk to retrieve the information needed to charge for local
and toll calls.
Message Reminder
This feature allows a user or Attendant to turn on the message waiting (MW) lamp of a Single Line
Telephone, or the Message Reminder (MSG) LED of a Multiline Terminal (if assigned).
Message Waiting
Message Waiting – Single Lamp
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument,
administrative station, Voice Mail System (VMS) or Property Management System (PMS)
terminal to light a lamp (on an uninterrupted or interrupted basis) on a Single Line Telephone or
Multiline Terminal to indicate a message is waiting.
Message Waiting – Multiple Lamp
This feature allows the Attendant Console, Hotel/Motel (H/M) Front Desk Instrument,
administrative station, Voice Mail Systems (VMS) or Property Management System (PMS)
terminal to light multiple line keys on a Multiline Terminal, to indicate a message is waiting.
This allows multiple individuals who share the same Multiline Terminal to receive their own
Message Waiting indication.
Voice Message Waiting
In addition to the lamp indication control, this feature also provides the Voice Message Waiting
service that an originating station user can set the Message Waiting with a recorded message by
using the Digital Announcement Trunk (DAT) card.
• Voice Message Waiting – System
An originating station user can choose the recorded message to be set by dialing the
message number associated. The messages are recorded by the predetermined station.
• Voice Message Waiting - Individual
When setting Message Waiting, an originating station user announces the message to be
recorded after dialing the station number.