Filter
Top Products
CHAPTER 3 TERMINALS
Page 82 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Key Features and Benefits
The Dterm SP20 offers a full complement of station features and impressive voice quality over IP for
this important segment of mobility and PC-based applications. Most of the features and functions,
which exist on the IP Dterm and/or IP enabled Dterm can be instantly transported to the SoftPhone.
Basic features offered by the Dterm SP20 include:
Configurable for Peer-to-Peer or Protims IP for IPELC Voice Communications
No need to load new software in order to operate a different protocol. The Dterm SP20 supports
both Protims IP and peer-to-peer. Administrators are able to invoke the protocol via the Dterm
SP20 control.
Powerful User Interface (Dterm SP20 and Java GUIs) with a NEC Hardware
Terminal Appearance
The Dterm SP20 provides a user configurable GUI (Graphical User Interface), enabling the user
to access telephone features. Most of the procedures are easy to perform by selecting the buttons
on the screen with the mouse. The display may be freely customized in order to create an
environment best suited for specific requirements.
Displays call records in Quick Reference List via the Call Log Window
All calls are recorded one by one in the call log. You can find at a glance when and with whom
you talked. The Dterm SP20 also offers a call memo function whereby you can record the key
points of the call so that you can visually identify the individual records.
Recording Function
Use the personal computer in place of a tape recorder to record the contents of a call. Record the
contents of a call in a sound file and reproduce the saved contents of a call anytime from the call
log window. Since the file is stored as a .wav file, you can e-mail and forward it to other
personnel for their listening pleasure.
Macro Function for Launching or closing Dterm SP20
The macro function will enable the user to launch related applications, which might run
simultaneously with the Dterm SP20. One selection and all applications are launched.
Support for multiple algorithms
The Dterm SP20 supports both G.711 and G.729A compression algorithms.
PBX support
The Dterm SP20 is capable of being programmed for either a peer-to-peer or IPELC
configuration.
IPELC Software licenses requirements
Software seat requirements for the IPELC configuration are based on a dongle implementation.
There is no PBX IP seat licenses required for the Dterm SP20 IPELC operation. The number of
licenses depends on the type of licenses key purchased.
The dongles are pre-configured for the following number of licenses:
- 10-seat license
- 20-seat license
- 40-seat license
- 100-seat license
Peer to Peer software licenses requirements
In a peer-to-peer Dterm SP20 configuration, all the software seats are assigned via the PBX. The
PBX will require an IP seat license and concurrent seat available in order to activate each
softphone.