Filter
Top Products
CHAPTER 6 INSTALLATION, PROGRAMMING, AND MAINTENANCE
NEAX 2000 IPS General Description Page 153
NDA-24345, Issue 3
PBX Configuration Wizard
The PBX Configuration Wizard is a custom tool in MATWorX that enables you to establish the
proper communication settings between your computer and the NEAX2000 IPS. The Wizard asks
you simple questions and then uses the information to automatically configure the connection for the
PC and the PBX.
Service Conditions
1. Connection through modems is available, providing remote maintenance capabilities.
2. MATWorX can be connected to the system either directly or remotely. Direct connection is
through the RS connector on the MP card. Remote connection is available via either an internal
modem on the MP card or an external modem for high speed. Remote connection via the internal
modem is through the COT card. Connection between the modem and the COT is accomplished
through internal switching of the TDSW. Remote connection via an external modem is through
the MP card.
3. The following functions can be performed from MATWorX:
System, station, and trunk data entry, change, and copy.
Loading, saving, and verification of system data to and from a disk.
ROM check readout of generic program.
Display of fault/fault cleared messages.
On-site or remote access to the system.
Printout of system data (when printer is connected to PC).
Display and setting of system clock/calendar.
Numbering Plan
Least Cost Routing (LCR)
System initialize
UCD/Station Hunting/Call Pickup – Group
4. The PC used with MATWorX must have an RS-232C port, and cannot be located more than 50
feet (15m) from the system when connected on premises.
5. When stations or trunks are expanded, moved, or changed, office data for a Multiline Terminal
key/station/ trunk can be copied and multiple assignments of related office data is possible.
MACH Script Editor
This is a powerful timesaving tool that enables you to create a list of NEAX2000 IPS commands that
perform tasks in the PBX. This list is referred to as a script, which can be saved and run at anytime.
You can also use the MACH Script Editor to perform many other operations.