NEC V300X Projector User Manual


  Open as PDF
of 99
 
20
3. Projecting an Image (Basic Operation)
Selecting a Source
Selecting the computer or video source
NOTE:Turnonthecomputerorvideosourceequipmentconnectedtotheprojector.
SelectingfromSourceList
Press and quickly release the SOURCE button on the projector cabinet to display
the Source list. Each time the SOURCE button is pressed, the input source will
change as follows: “COMPUTER”, ”VIDEO”, “S-VIDEO”. To display the selected
source,presstheENTERbuttonorallow2secondstoelapse.
DetectingtheSignalAutomatically
PressandholdtheSOURCEbuttonforaminimumof2seconds,theprojector
will search for the next available input source. Each time you press and hold the
SOURCEbuttonforaminimumof2seconds,theinputsourcewillchangeas
follows:
V230X/V260/V230:
COMPUTER → VIDEO → S-VIDEO → COMPUTER → ...
V300X/V260X:
COMPUTER 1 →COMPUTER2→ VIDEO → S-VIDEO → COMPUTER 1 → ...
TIP: If no input signal is present, the input will be skipped.
UsingtheRemoteControl
V230X/V260/V230: Press any one of the COMPUTER 1, VIDEO, and S-VIDEO
buttons.
V300X/V260X:PressanyoneoftheCOMPUTER1,COMPUTER2,VIDEO,
and S-VIDEO buttons.
SelectingDefaultSource
You can set a source as the default source so that it will be displayed each time
the projector is turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the button twice to select [SETUP] and press the button or
the ENTER button to select [GENERAL].
3.
Press the
button four times to select [OPTIONS(2)].
4. Press the button six times to select [DEFAULT SOURCE SELECT] and
press the ENTER button.
The [DEFAULT SOURCE SELECT] screen will be displayed.
(→ page 64)
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
TIP:WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputer
connectedtotheCOMPUTERINinputwillpowerontheprojectorandsimultaneously
projectthecomputer’simage.
([AUTOPOWERON(COMP.)]forV230X/V260/V230/[AUTOPOWERON(COMP1)]for
V300X/V260X→ page 64)
V230X/V260/V230
V230X/V260/V230
V300X/V260X
V300X/V260X
 previous next