NEC V300X Projector User Manual


  Open as PDF
of 99
 
64
5. Using On-Screen Menu
TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP.)forV230X/V260/
V230/[AUTOPOWERON(COMP1)]forV300X/V260X]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER
INinput(COMPUTER1INonV300X/V260X)willpowerontheprojectorandsimultaneouslyprojectthecomputer’s
image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
NOTE:
• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-
binationoftheAUTOPOWEROFFfunction.
• Thisfunctionwillnotbeavailableunderthefollowingconditions:
- whenacomponentsignalisappliedtotheCOMPUTERIN(COMPUTER1INonV300X/V260X)connector
- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied
• ToenabletheAUTOPOWERON(COMP.)/AUTOPOWERON(COMP1)afterturningofftheprojector,wait3secondsandinputa
computer signal.
Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)/AUTOPOWERON(COMP1)
will not work and the projector remains in standby mode.
EnablingPowerManagement[AUTOPOWEROFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min.,30min.)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.
SelectingDefaultSource[DEFAULTSOURCESELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST ...................................Sets the projector to default to the previous or last active input each time the projector is turned
on.
AUTO ..................................Searches for an active source in order of COMPUTER → VIDEO → S-VIDEO → COMPUTER (COM-
PUTER 1 → COMPUTER 2 on V300X/V260X) and displays the first found source.
COMPUTER ........................Displays the computer signal from the COMPUTER IN connector every time the projector is turned
on.
COMPUTER 1
(V300X/V260X) ...................Displays the computer signal from the COMPUTER 1 IN connector every time the projector is turned
on.
COMPUTER 2
(V300X/V260X) ...................Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned
on.
VIDEO .................................Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO .............................Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
 previous next