NEC V300X Projector User Manual


  Open as PDF
of 99
 
37
4. Convenient Features
Network Setting by Using an HTTP Browser (V300X/V260X)
Overview
Connecting the projector to a network allows the Alert Mail setting (→ page 39) and the projector control from a
computer via the network.
To perform the projector control from a web browser, you must have an exclusive application installed on your com-
puter.
The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by
usinganHTTPserverfunction.Pleasebesuretouse“MicrosoftInternetExplorer6.0”orahigherversionfortheweb
browser.(Thisdeviceuses“JavaScript”and“Cookies”andthebrowsershouldbesettoacceptthesefunctions.The
setting method will vary depending on the version of browser. Please refer to the help files and the other information
provided in your software.)
Access is gained to the HTTP server function by starting the Web browser on the computer via the network connected
to the projector and enter the following URL.
• NetworkSetting
http://<the projector’s IP address>/index.html
• AlertMailSetting
http://<the projector’s IP address>/lanconfig.html
TIP:
• ThedefaultIPaddressis“192.168.0.10”.
• Theexclusiveapplicationcanbedownloadedfromourwebsite.
NOTE:
• IfthePROJECTORNETWORKSETTINGSscreendoesnotappearinthewebbrowser,presstheCtrl+F5keystorefreshyourweb
browser (or clear the cache).
• Thedisplay’sorbutton’sresponsecanbesloweddownoroperationmaynotbeaccepteddependingthesettingsofyournetwork.
Shouldthishappen,consultyournetworkadministrator.
Theprojectormaynotrespondifitsbuttonsarerepeatedlypressedinrapidintervals.Shouldthishappen,waitamomentand
repeat.Ifyoustillcan’tgetanyresponse,turnoffandbackontheprojector.
Preparation Before Use
Connect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 16)
Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the
setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set
will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be
reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.
HandlingoftheAddressforOperationviaaBrowser
Regarding the actual address that is entered for the address or entered to the URL column when operation of the pro-
jector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the
projector has been registered to the domain name server by a network administrator, or the host name corresponding
to the IP address of the projector has been set in the “HOSTS” file of the computer being used.
Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network
setting by specifying
http://pj.nec.co.jp/index.html
for the address or the entry column of the URL.
Example2: WhentheIPaddressoftheprojectoris“192.168.73.1”,accessisgainedtothemailalertsettingsby
specifying
http://192.168.73.1/index.html
for the address or the entry column of the URL.
 previous next