NETGEAR D6300 Network Router User Manual


 
Supplemental Information
130
D6300 WiFi DSL Modem Router
Factory Settings
You can return the WiFi DSL modem router to its factory settings. Use the end of a paper clip
or some other similar object to press and hold the Restore Factory Settings button on the
back of the router for at least 5 seconds. The WiFi DSL modem router resets and returns to
the factory settings.
Your device returns to the factory configuration settings shown in the
following table.
Table 11. Factory default settings
Feature Default Behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.0.2 to 192.168.0.254
Allow a registrar to configure this
router
Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
Local network
(LAN) continued
DMZ Disabled
Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Time zone adjusted for daylight
savings time
Disabled
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering Disabled