Filter
Top Products
NETGEAR genie BASIC Settings
35
D6300 WiFi DSL Modem Router
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the WiFi DSL modem router.
To view or change basic wireless settings:
1. On the BASIC Home screen, select W
ireless to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2. Make any necessary changes, and click Apply to save your settings.
3. Set up and test your wireless devices and computers to make sure that they can connect
wirelessly
. If they do not, check the following:
• Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover
.
• Does your wireless device or computer show up on the
Attached Devices screen? If it
does, then it is connected to the network.
• If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your WiFi DSL modem router.
Wireless Settings Screen Fields
Region. The location where the WiFi DSL modem router is used. Select from the countries in
the list. In the United States, the region is fixed to United States and is not changeable.