NETGEAR D6300 Network Router User Manual


 
Advanced Settings
99
D6300 WiFi DSL Modem Router
Note: If you are using the D6300 base station with a non-NETGEAR WiFi
DSL modem router as the repeater, you might need to change
additional configuration settings. In particular, you should disable the
DHCP server function on the wireless repeater AP.
To configure the WiFi DSL modem router as a repeater unit:
1. Log in to the WiFi DSL modem router that is the repeater. Select BASIC > Wireless
Settings and verify that the wireless settings match the base unit exactly. The wireless
security option has to be set to WEP or None.
2. Select ADVANCED > Advanced Setup > Wireless Repeating Function, and select the
Enable Wireless Repeating Function check box and the Wireless Repeater radio
button.
3. Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the
base station, but different from the LAN IP of the base station.
4. Click Apply to save your changes.
5. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the WiFi DSL modem router should
be able to connect to the Internet or share files and printers with any other wireless or
wired computer or server connected to the other access point.
Port Forwarding and Triggering
By default, the WiFi DSL modem router blocks inbound traffic from the Internet to your
computers except replies to your outbound traffic. You might need to create exceptions to
this rule for these purposes:
To allow remote computers on the Internet to access a server on your local network.
To allow certain applications and games to work correctly when their replies are not
recognized by your WiFi DSL modem router.
Your WiFi DSL modem router provides two features for creating these exceptions: port
forwarding and port triggering. The next sections provide background information to help you
understand how port forwarding and port triggering work, and the differences between the
two.
Remote Computer Access Basics
When a computer on your network needs to access a computer on the Internet, your
computer sends your WiFi DSL modem router a message containing the source and
destination address and process information. Before forwarding your message to the remote
computer, your WiFi DSL modem router has to modify the source information and create and
track the communication session so that replies can be routed back to your computer.
Here is an example of normal outbound traffic and the resulting inbound responses: