Filter
Top Products
Routing Commands
258
ProSafe M4100 and M7100 Managed Switches
no bootpdhcprelay cidoptmode
This command disables the circuit ID option mode for BootP/DHCP Relay on the system.
Format no bootpdhcprelay cidoptmode
Mode
bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay
on the system. The <hops> parameter has a range of 1–16.
Default
Format bootpdhcprelay maxhopcount <1-16>
Mode
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/DHCP
Relay on the system.
Format no bootpdhcprelay maxhopcount
Mode
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to
relay the request or not. The parameter has a range of 0–100 seconds.
Default
Format bootpdhcprelay minwaittime <0-100>
Mode
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay
on the system.
Format no bootpdhcprelay minwaittime
Mode
Global Config
4
Global Config
Global Config
0
Global Config
Global Config