Filter
Top Products
Utility Commands
545
ProSafe M4100 and M7100 Managed Switches
port
Use this command to configure the TCP port to use for communication with the SMTP server.
The recommended port for TLSv1 is 465, and for no security (i.e. none) it is 25. However, any
nonstandard port in the range 1–65,535 is also allowed.
Default
Format port {465 | 25 | 1–65535}
Mode
username
Use this command to configure the login ID that the switch uses to authenticate with the
SMTP server.
Default
Format username name
Mode
password
Use this command to configure the password that the switch uses to authenticate with the
SMTP server.
Format password password
Mode
show mail-server config
Use this command to display information about the email alert configuration.
Format show mail-server {ip-address | hostname | all } config
Mode
25
Mail Server Config
admin
Mail Server Config
Mail Server Config
Privileged EXEC
Term Definition
No of mail
servers
configured
The number of SMTP servers configured on the switch.
Email Alert Mail
Server Address
The IPv4/IPv6 address or DNS hostname of the configured SMTP server.
Email Alert Mail
Server Port
The TCP port the switch uses to send email to the SMTP server.
Email Alert
Security
Protocol
The security protocol (TLS or none) the switch uses to authenticate with the SMTP
server
.