NETGEAR M4100-26-POE Switch User Manual


 
IfIndex
Nbr IP Addr
State
Up Time
Expiry Time
Generation ID
Major Version
Minor Version
Capabilities
Received
Routes
Rcvd Bad Pkts
Rcvd Bad
Routes
IP Multicast Commands
330
ProSafe M4100 and M7100 Managed Switches
show ip dvmrp nexthop
This command displays the next hop information on outgoing interfaces for routing multicast
datagrams.
Format show ip dvmrp nexthop
Modes
• Privileged EXEC
• User EXEC
Source IP
Source Mask
Next Hop
Interface
Type
Term Definition
The value of the interface used to reach the neighbor.
The IP address of the DVMRP neighbor for which this entry contains information.
The state of the neighboring router. The possible values for this field are ACTIVE or
DOWN.
The time since this neighboring router was learned.
The time remaining for the neighbor to age out. This field is not applicable if the State is
DOWN.
The Generation ID value for the neighbor.
The major version of DVMRP protocol of neighbor.
The minor version of DVMRP protocol of neighbor.
The capabilities of neighbor.
The number of routes received from the neighbor.
The number of invalid packets received from this neighbor.
The number of correct packets received with invalid routes.
Term Definition
The sources for which this entry specifies a next hop on an outgoing interface.
The IP Mask for the sources for which this entry specifies a next hop on an outgoing
interface.
The interface in slot/port format for the outgoing interface for this next hop.
The network is a LEAF or a BRANCH.