Filter
Top Products
Quality of Service (QoS) Commands
488
ProSafe M4100 and M7100 Managed Switches
Time Range Commands for Time-Based ACLs
Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule
within an ACL, except for the implicit
deny all rule, can be configured to be active and
operational only during a specific time period. The time range commands allow you to define
specific times of the day and week to implement time-based ACLs. The time range is
identified by a name and can then be referenced by an ACL rule defined with in an ACL.
time-range
Use this command to create a time range identified by name, consisting of one absolute time
entry and/or one or more periodic time entries. The
name parameter is a case-sensitive,
alphanumeric string from 1 to 31 characters that uniquely identifies the time range. An
alpha-numeric string is defined as consisting of only alphabetic, numeric, dash, underscore,
or space characters. If a time range by this name exists, this command enters Time-Range
config mode to allow updating the time range entries
Note: When you successfully execute this command, the CLI mode
changes to Time-Range Config mode.
Format time-range <name>
Mode
no time-range
Use this command to delete a time-range identified by
name.
Format no time-range <name>
Mode
absolute
Use this command to add an absolute time entry to a time range. Only one absolute time
entry is allowed per time-range. The
time parameter is based on the currently configured
Mirror Interface
The slot/port to which packets matching this rule are copied.
Redirect
Interface
The slot/port to which packets matching this rule are forwarded.
Time Range
Name
Displays the name of the time-range if the IPv6 ACL rule has referenced a time range.
Rule Status
Status(Active/Inactive) of the IPv6 ACL rule.
Global Config
Global Config
Term Definition