NETGEAR M4100-26-POE Switch User Manual


 
Utility Commands
589
ProSafe M4100 and M7100 Managed Switches
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
Format no debug igmpsnooping receive
Mode
debug ip acl
Use this command to enable debug of IP Protocol packets matching the ACL criteria.
Default
Format debug ip acl <acl Number>
Mode
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
Format no debug ip acl <acl Number>
Mode
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission. receive traces only
received DVMRP packets and transmit traces only transmitted DVMRP packets. When
neither keyword is used in the command, then all DVMRP packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length,
and the interface on which the packet is received or transmitted is displayed on the console.
Default
Format debug ip dvmrp packet [receive|transmit]
Mode
Type
The type of IGMP packet. Type can be one of the following:
Membership_Query – IGMP Membership Query
V1_Membership_Report – IGMP V
ersion 1 Membership Report
V2_Membership_Report – IGMP V
ersion 2 Membership Report
V3_Membership_Report – IGMP V
ersion 3 Membership Report
V2_Leave_Group – IGMP V
ersion 2 Leave Group
Group
Multicast group address in the IGMP header.
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC
Parameter Definition