Filter
Top Products
Switching Commands
84
ProSafe M4100 and M7100 Managed Switches
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
Format no dot1x unauthenticated-vlan
Mode
dot1x user
This command adds the specified user to the list of users with access to the specified port or
all ports. The <user> parameter must be a configured user.
Format dot1x user <user> {<slot/port> | all}
Mode
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
Format no dot1x user <user> {<slot/port> | all}
Mode
clear dot1x authentication-history
This command clears the authentication history table captured during successful and
unsuccessful authentication on all interface or the specified interface.
Format clear dot1x authentication-history [slot/port]
Mode
dot1x dynamic-vlan enable
Use this command to enable the switch to create VLANs dynamically when a RADIUS
assigned VLAN does not exist in the switch.
Format dot1x dynamic-vlan enable
Mode
Default
Interface Config
Global Config
Global Config
Global Config
Global Config
Disabled