Filter
Top Products
Utility Commands
528
ProSafe M4100 and M7100 Managed Switches
If you enter the interface <slot/port> parameter, in addition to the MAC Address and
Status fields, the following field appears:
VLAN ID
The following information displays if you enter the count parameter:
Dynamic
Address count
Static Address
(User-defined)
count
Total MAC
Addresses in
use
Total MAC
Addresses
available
process cpu threshold
Use this command to configure the CPU utilization thresholds. The Rising and Falling
thresholds are specified as a percentage of CPU resources. The utilization monitoring time
period can be configured from 5 seconds to 86,400 seconds in multiples of 5 seconds. The
CPU utilization threshold configuration is saved across a switch reboot. Configuring the
Interface Index
This object indicates the ifIndex of the interface table entry associated with this port.
Status
The status of this entry. The meanings of the values are:
• Static.
The value of the corresponding instance was added by the system or a user
when a static MAC filter was defined. It cannot be relearned.
• Learned. The value of the corresponding instance was learned by observing the
source MAC addresses of incoming traf
fic, and is currently in use.
• Management.
The value of the corresponding instance (system MAC address) is also
the value of an existing instance of dot1dStaticAddress. It is identified with interface
0/1. and is currently used when enabling VLANs for routing.
• Self.
The value of the corresponding instance is the address of one of the switch’s
physical interfaces (the system’s own MAC address).
• GMRP Learned.
The value of the corresponding was learned via GMRP and applies
to Multicast.
• Other.
The value of the corresponding instance does not fall into one of the other
categories.
Term Definition
The VLAN on which the MAC address was learned.
Term Definition
Number of MAC addresses in the forwarding database that were automatically learned.
Number of MAC addresses in the forwarding database that were manually entered by a
user
.
Number of MAC addresses currently in the forwarding database.
Number of MAC addresses the forwarding database can handle.
Term Definition