Filter
Top Products
Green Ethernet Commands
742
ProSafe M4100 and M7100 Managed Switches
Interface Energy-Detect Short-Reach-Config Short-Reach EEE
Config Opr Auto Forced Opr Config
--------- --------- --------- --------- --------- ----------- --------
0/21 Disabled Inactive Disabled
0/22 Disabled Inactive Disabled
0/23 Disabled Inactive Disabled
0/24 Disabled Inactive Disabled
0/25 Disabled Inactive Disabled
green-mode eee-lpi-history {sampling-interval <30sec - 36000sec> |
max-samples <1 - 168>}
Configure Global EEE LPI history collection interval and buffer size using this command. This
value is applied globally on all interfaces on the stack.
Note: The Sampling interval configured by the user takes effect
immediately. The current and future samples are collected at this
new sampling interval.
Format green-mode eee-lpi-history {sampling-interval <30sec - 36000sec>
| max-samples <1 - 168>}
Mode
Default
no green-mode eee-lpi-history {sampling-interval | max-samples }
Use this command to set the sampling interval or max-samples values to default:
sampling-interval = 3600
max-samples = 168
Format no green-mode eee-lpi-history {sampling-interval | max-samples}
Mode
Global Config
sampling-interval = 3600; max-samples = 168
Global Config