Filter
Top Products
Utility Commands
568
ProSafe M4100 and M7100 Managed Switches
no bootfile
This command deletes the boot image name.
Format no bootfile
Mode
domain-name
This command specifies the domain name for a DHCP client. The <domain> specifies the
domain name string of the client.
Default
Format domain-name <domain>
Mode
no domain-name
This command removes the domain name.
Format no domain-name
Mode
netbios-name-server
This command configures NetBIOS Windows Internet Naming Service (WINS) name servers
that are available to DHCP clients.
One IP address is required, although one can specify up to eight addresses in one command
line. Servers are listed in order of preference (address1 is the most preferred server,
address2 is the next most preferred server, and so on).
Default
Format netbios-name-server <address> [<address2>...<address8>]
Mode
no netbios-name-server
This command removes the NetBIOS name server list.
Format no netbios-name-server
Mode
DHCP Pool Config
none
DHCP Pool Config
DHCP Pool Config
none
DHCP Pool Config
DHCP Pool Config