Filter
Top Products
Management Commands
665
ProSafe M4100 and M7100 Managed Switches
Example:
(switch) #
(switch) #show accounting methods
Acct Type Method Name Record Type Method Type
---------- ------------ ------------ ------------
Exec dfltExecList start-stop TACACS
Commands dfltCmdsList stop-only TACACS
Commands UserCmdAudit start-stop TACACS
Line EXEC Method List Command Method List
--------- -------------------- --------------------
Console none none
Telnet none none
SSH none none
HTTPS none none
HTTP none none
aaa authorization
This command creates an authorization method list. This list is identified by “default” or a
user-specified “list_name.” If “tacacs” is specified as the Authorization method, Authorization
commands are notified to a TACACS+ server. If “none” is specified as the Authorization
method, command authorization is not applicable. A maximum of five Authorization Method
Lists can be created for “commands” type.
Note: Local method is not supported for command Authorization. Also
note that command authorization with RADIUS works only if the
applied authentication method is also radius.
Format aaa authorization {commands | exec } {default | <list_name>}
method1[method2]
Mode
commands
Exec
default
list-name
method
Global Config
Term Definition
Alphanumeric character string used to name the list of authorization methods.
The default list of methods for authorization services.
The default list of methods for authorization services.
Alphanumeric character string used to name the list of authorization methods.
TACACS+/RADIUS/Local and none are supported.