Filter
Top Products
Switching Commands
204
ProSafe M4100 and M7100 Managed Switches
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format no bridge aging-time
Mode
show forwardingdb agetime
This command displays the timeout for address aging.
Default
Format show forwardingdb agetime
Mode
Address Aging
Timeout
show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If you enter
the command with no parameter, the entire table is displayed. You can display the table entry
for one MAC Address by specifying the MAC address as an optional parameter.
Format show mac-address-table multicast <macaddr>
Mode
MAC Address
Type
Component
Description
Interfaces
Forwarding
Interfaces
Global Config
300s
Privileged EXEC
Term Definition
This parameter displays the address aging timeout for the associated forwarding
database.
Privileged EXEC
Term Definition
A multicast MAC address for which the switch has forwarding and or filtering information.
The format is two-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC
address and VLAN ID combination of 8 bytes.
The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
The component that is responsible for this entry in the Multicast Forwarding Database.
Possible values are IGMP Snooping, GMRP
, and Static Filtering.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
The resultant forwarding list is derived from combining all the component’s forwarding
interfaces and removing the interfaces that are listed as the static filtering interfaces.