Filter
Top Products
Utility Commands
538
ProSafe M4100 and M7100 Managed Switches
show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format show logging buffered
Mode
Buffered
(In-Memory)
Logging
Buffered
Logging
Wrapping
Behavior
Buffered Log
Count
show logging hosts
This command displays all configured logging hosts.
Format show logging hosts
Mode
Host Index
IP Address /
Hostname
Severity Level
Port
Host Status
show logging traplogs
This command displays SNMP trap events and statistics.
Format show logging traplogs
Mode
Privileged EXEC
Term Definition
Shows whether the In-Memory log is enabled or disabled.
The behavior of the In Memory log when faced with a log full situation.
The count of valid entries in the buffered log.
Privileged EXEC
Term Definition
(Used for deleting hosts.)
IP address or hostname of the logging host.
The minimum severity to log to the specified address. The possible values are
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug
(7).
The server port number, which is the port on the local host from which syslog messages
are sent.
The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Privileged EXEC