Filter
Top Products
Switching Commands
206
ProSafe M4100 and M7100 Managed Switches
isdp timer
This command sets the period of time between sending new ISDP packets. The range is
given in seconds.
Default
Format isdp timer <5-254>
Mode
isdp advertise-v2
This command enables the sending of ISDP version 2 packets from the device.
Default
Format isdp advertise-v2
Mode
no isdp advertise-v2
This command disables the sending of ISDP version 2 packets from the device.
Format no isdp advertise-v2
Mode
isdp enable
This command enables ISDP on the interface.
Default
Format isdp enable
Mode
no isdp enable
This command disables ISDP on the interface.
Format no isdp enable
Mode
Format isdp holdtime <10-255>
Mode
Global Config
30 seconds
Global Config
Enabled
Global Config
Global Config
Enabled
Interface Config
Interface Config