Filter
Top Products
Utility Commands
619
ProSafe M4100 and M7100 Managed Switches
udld timeout interval
This command configures the time interval after which UDLD link is considered to be
unidirectional. The range is from 5 to 60 seconds.
Default
Format udld timeout interval <interval>
Mode
udld enable
This command enables UDLD on the specified interface.
Default
Format udld enable
Mode
no udld enable
This command disables udld on the specified interface.
Format no udld enable
Mode
udld port
This command selects the UDLD mode operating on this interface. If the keyword
“aggressive” is not entered, the port operates in normal mode.
Default
Format udld port [aggressive]
Mode
udld reset
This command resets all interfaces that have been shutdown by UDLD.
Format udld reset
Mode
5
Global Config
disabled
Interface Config
Interface Config
normal
Interface Config
Privileged EXEC