Filter
Top Products
Specify Your Internet Settings
42
AC1750 Smart WiFi Router
5. In the MTU Size field, enter a value from 64 to 1500.
6. Click the Apply button.
Your change is saved.
If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500
until the problem goes away
. The following table describes common MTU sizes and
applications.
Table 2. Common MTU sizes
MTU Application
1500 The largest Ethernet packet size. This setting is typical for connections that do not use
PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches.
1492 Used in PPPoE environments.
1472 Maximum size to use for pinging. (Larger packets are fragmented.)
1468 Used in some DHCP environments.
1460 Usable by AOL if you do not send or receive large email attachments, for example.
1436 Used in PPTP environments or with VPN.
1400 Maximum size for AOL DSL.
576 Typical value to connect to dial-up ISPs.
Enable the Bridge or Add a VLAN Tag Group
Some devices, such as an IPTV, cannot work behind a router’s Network Address Translation
(NAT) or firewall. Based on what your Internet service provider (ISP) requires, to allow the
device to connect to the ISP’s network directly, you must enable the bridge between the
device and the router’s Internet port or add new VLAN tag groups to the bridge.
Enable the Bridge
If your device, such as an IPTV, is connected to the router’s Ethernet port or WiFi network,
you can enable the bridge so that the packets sent between the device and the router’s
Internet port are not processed through the router’s Network Address Translation (NAT).
To enable the bridge:
1. Launch an Internet browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.