Filter
Top Products
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
1-6 Introduction
v1.1, March 2009
Default IP Address, Login Name, and Password Location
Check the label on the bottom of the STM150’s enclosure if you need a reminder of the following
factory default information:
Choosing a Location for the STM150
The STM150 is suitable for use in an office environment where it can be free-standing or mounted
in a standard 19-inch equipment rack. Alternatively, you can rack-mount the STM150 in a wiring
closet or equipment room. A mounting kit, containing two mounting brackets and four screws, is
provided in the STM150 package.
When deciding where to position the STM150, ensure that:
• It is accessible and cables can be connected easily.
• Cabling is away from sources of electrical noise. These include lift shafts, microwave ovens,
and air conditioning units.
• Water or moisture cannot enter the case of the unit.
• Airflow around the unit and through the vents in the side of the case is not restricted. Provide a
minimum of 25 mm or 1 inch clearance.
• The air is as free of dust as possible.
• Temperature operating limits are not likely to be exceeded. Install the unit in a clean, air-
conditioned environment. For information on the recommended operating temperatures for the
STM150, refer to Appendix A, “Default Settings and Technical Specifications.
Figure 1-4
IP Address
User Name
Password