NETGEAR STM150EW3-100NAS Switch User Manual


 
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
Default Settings and Technical Specifications A-1
v1.1, March 2009
Appendix A
Default Settings and Technical Specifications
You can use the reset button located on the rear panel to reset all settings to their factory defaults.
To perform a hard reset, press and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-2 below.
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. STM150 Default Configuration Settings
Feature Default
Login
User Login URL https://192.168.1.201
Admin User Name (case sensitive) admin
Admin Login Password (case sensitive) password
Guest User Name (case sensitive) guest
Guest Login Password (case sensitive) guest
Management
System Configuration Web-based configuration and status monitoring
Required Minimum Browser versions Internet Explorer 5.0 or higher or
Mozilla Firefox 1.0 or higher
Note: When the unit scans secure HTTPS traffic, you
must import the root CA certificate into your browser from
the STM150 login screen.
Time Zone GMT
Time Adjusted for Daylight Saving Time Disabled
SNMP Disabled
Remote Management Disabled
Administration Console Port RS232