Filter
Top Products
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
3-14 Performing System Management Tasks
v1.1, March 2009
Enabling Remote Management
To enable remote management, go to Administration > Remote Management.
Enter the port number you wish to use. You may enter port 443 or a port ranging from 1024 to
65535. Some ports which could have been used by the system (such as: 2080, 8081...) cannot be
used here. Click Apply.
Click Reset to reset the port to the default value (443).
You can also specify IP addresses or IP address ranges that you want to allow access to the Web
interface.
Figure 3-11