Filter
Top Products
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
3-2 Performing System Management Tasks
v1.1, March 2009
For other devices connected to the STM150 (such as a firewall or a switch), you now have an
option to manually change the duplex settings. This feature will allow STM150 to integrate with
other devices seamlessly. The default setting is Auto.
For example, if the firewall is connected to LAN-1 on the STM150 with the 10M/s connection
setting, you may go to the STM150 Web interface and make the changes. Go to Global Settings >
Network Setting. Under Speed, change the duplex setting for LAN-1.
The maximum transmission unit (MTU) is the largest physical packet size that a network can
transmit. Packets that are larger than the MTU value will be divided into smaller packets before
they are sent, an action that will prolong the transmission process.
Most networks have an MTU value of 1500. To minimize transmission delays, assure that the
MTU setting of the STM150 matches your network.
Clicking on Reset on the Global Settings > Network Setting screen will reset all settings back to
their default values (IP 192.168.1.201, MTU 1500...etc).
Figure 3-1