Filter
Top Products
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
Performing System Management Tasks 3-19
v1.1, March 2009
3. Enter the new password under the New Password field.
4. To confirm, enter the new password again under the Retype New Password field.
5. Click Apply.
To edit the Guest User Name, from the main menu, click Administration > Set Password.
1. Select Edit Guest Settings
2. Under Guest Settings, type the new user name under the New User Name field.
3. Enter the current password (guest is the factory default) under the Old Password field.
4. Click Apply.
To edit the Guest Password, from the main menu, click Administration > Set Password.
1. Select Edit Guest Settings
2. Enter the current password under the Old Password field.
3. Enter the new password under the New Password field.
4. To confirm, enter the new password again under the Retype New Password field.
5. Click Apply.
You can configure STM150 to automatically log off any of its Web interface sessions if no activity
is detected within a specified period of time. To configure Web interface timeout, from the main
menu, click Administration > Set Password.
In Session Timeout under Web Interface Timeout, specify the number seconds of inactivity
(timeout) after which the Web interface session will be terminated. The default timeout is 600
seconds. Click Apply to save your changes.