Filter
Top Products
ProSecure Web/Email Security Threat Management Appliance STM150 Reference Manual
Performing System Management Tasks 3-13
v1.1, March 2009
Resetting to Factory Defaults
You can use the default button on the Backup & Restore Settings page to revert to factory default
settings, or you can use the reset button on the back of the unit.
Use the Reset button to restore the factory defaults. Use a sharp object, press and hold this button
for about ten seconds until the front panel Test light flashes to reset the unit to factory default
settings.
Restarting the STM150
Restarting the STM150 will temporarily terminate all network connections that pass through it.
Network connection is restored as soon as the restart and startup processes are completed, usually
within a minute or two.
On the rear panel, press the Restart button: this restarts the unit; it does not reset the appliance to
its factory defaults.
Warning: If you reset the unit, all configuration settings will be lost, the default
password will be restored, and you will need to re-register the product license.
Figure 3-9
Figure 3-10 New Photo
Reset button
Restart button