Filter
Top Products
Utilities and Diagnostics 15-7
Disconnect Telnet Console Session
If you want to close your Telnet Console session, select Disconnect Telnet Console Session and press Return.
A dialog box appears asking you to cancel or continue your selection.
If you select Continue, you will immediately terminate your session.
Factory defaults
You can reset the Netopia R2121 to its factory default settings. Select the Revert to Factory Defaults item in
the Statistics & Diagnostics screen and press Return. Select CONTINUE in the dialog box and press Return.
The Netopia R2121 will reboot and its settings will return to the factory defaults, deleting your configurations.
In an emergency, you can also use the Reset Switch to return the router to its factory default settings. Call
Netopia Tech Support for instructions on using the Reset Switch.
Note: Reset to factory defaults with caution. You will need to reconfigure all your settings in the router.
Transferring configuration and firmware files with TFTP
Trivial File Transfer Protocol (TFTP) is a method of transferring data over an IP network. TFTP is a client-server
application, with the Router as the client. To use the Router as a TFTP client, a TFTP server must be available.
Netopia, Inc. has a public access TFTP server on the Internet where you can obtain the latest firmware versions.
To use TFTP, select Trivial File Transfer Protocol (TFTP) in the Statistics & Diagnostics screen and press
Return to go to the Trivial File Transfer Protocol (TFTP) screen.
Utilities & Diagnostics
+------------------------------------------------------+
+------------------------------------------------------+
| |
| Are you sure you want to close this Console Session? |
| |
| CANCEL CONTINUE |
| |
| |
+------------------------------------------------------+
X-Modem File Transfer...
Revert to Factory Defaults...
Restart System...