Nortel Networks 7400 Switch User Manual


 
Power over LAN Hub - Power In-Line Patch Panel
103
Power over LAN Hub
- Power In-Line Patch Panel
Overview
There are two methods available from Nortel Networks. Either integrated via Baystack LAN Switching
(refer to Baystack 460) or Power over LAN Hub (POL).
The POL Hub is part of the Nortel Networks Succession portfolio of Internet Telephony Solutions. It provides
power to i2004/i2002 Internet telephones using existing LAN cable infrastructure. It delivers power over the
unused pairs of standard category 5 LAN cables. The POL Hub features a sophisticated load auto-sensing
algorithm that provides power to devices only as required. This monitoring capability ensures continuous
proper operation of i2004/i2002 Internet Telephones.
The POL Hub solution fits as standard equipment in the wiring closet and eliminates the need to connect
each telephone to an AC power outlet. The POL Hub can be operated with any commercially available UPS.
This solution consists of a centrally located power supply that is installed in the wiring closet. It supports
24 ports and connects as standard equipment into the wiring closet.
The IEEE 802.3 af standard
1
is emerging at present, both solutions above the Baystack and POL Hub are
compliant with this standard.
1
i200x will support this standard from mid year 03.
Customer Profile
The Power over LAN Hub forms the basis of a power
system that brings PBX reliability to Voice over IP
while maintaining the plug and play installation
typical of data networks. Power over the LAN and
reliable system backup are additional options
available to maximise system reliability throughout
the network and meet customer expectations for
telephony availability and reliability.
Technical Specification
Ordering Information
For further information, please contact your local
Nortel Networks Representative.
Number of Users
Data Rates
Dimensions
Weight
Environmental Conditions
Load Sensing
Fault Sensing
AC Power Requirements
Output Power
Power Feed
Discovery
Mounting
24
10/100 Mbps
(H) 66.4mm (2.6") x (W) 437mm (17.2") x (D) 300mm (11.8")
5kg (11 lbs)
Operating Temperature 32 to 104 F (0 to 40 C)
Automatic common mode sensing. Will not power up unused pairs unless a valid load is present
Automatic over/under current independent on each port
90-260VAC 50/60Hz commercial power
DC Input: -48V DC redundant power connector
48V DC 14 watts max per port, total output 192 watts
Common mode on pairs 4,5 & 7,8
Automatic common mode sensing. Will not power up unused pairs unless a valid load is present
19" rack mountable or stackable.