Filter
Top Products
4 • Introduction
1.3 Features
• PICMG 2.0 CompactPCI Specification R.3.0 Compliant
• PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant
• Standard 6U form factor, 1-slot (4TE/HP) width
• Pre-mounted low voltage BGA2 Pentium-III 500MHz CPU with 100MHz
FSB
• Pre-installed 64MB 144-pin SO-DIMM PC-100 RAM, support up to
512MB
• Build-in housing for 2.5” low profile HDD
• Supports up to 1 USB ports, 1 serial port, 1 parallel port, 1 floppy
interface
• Supports 14 bus-master PCI devices on CompactPCI bus peripheral
slots
• On-board high performance AGP 2x VGA display output by SMI SM721
controller
• Supports up to dual 10/100Mb Ethernet ports
• Supports Intel pre-boot execution environment (PXE) for boot from LAN
• Pre-installed CompactFlash type-II socket via removable daughter board
• Supports remote console on Serial ports
1.4 Specifications
1.4.1 Specifications of the cPCI-6760DK/P5
General CompactPCI Features
• PCI Rev.2.1 compliant
• PICMG 2.0 CompactPCI Specification R.3.0 Compliant
• PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant
Form Factor
• Standard 6U CompactPCI (board size: 233.35mm x 160mm)
• 1-slot (4 TE/HP, 20.32mm) width, incl. housing of 2.5” HDD
CPU/Cache
• Intel BGA2 Low Voltage Pentium III with 256KB on-die L2 cache @
500MHz speed & 100MHz FSB