Nu Technology cPCI-6760DK/P5 Computer Hardware User Manual


 
6 Introduction
On Board Super I/O
Winbond W83977EF
Supports high-speed bi-directional SPP/EPP/ECP parallel ports (DB-25
connector) on front panel with ESD protection to 4KV and downstream
device protection to 30V.
One floppy interface by daughter board (DB-6760J3), support two floppy
drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) 34-pin floppy
connector is available on DB-6760J3.
One 16C550 UARTs compatible RS-232 COM1 port with ESD protection
to 2KV on front CPU module.
USB Interface
Supports one USB ports.
USB Specification Rev. 1.1. compliant
Individual over-current protection
Watch-dog Timer
Programmable I/O port 3F0h and 3F1h to configure watchdog timer,
programmable timer 1~255 seconds or 1~255 minutes
Bundled easy-programming library for DOS, Windows 95, 98, NT
Hardware Monitoring
Winbond W83782D, monitoring CPU temperature, CPU fan, system
temperature and DC Voltages
On-board VGA Display
AGP 2x VGA controller SMI Lynx3DM SM721, with build-in 4M VRAM
High performance, 128-bit, single clock cycle 2D drawing engine
High performance, power managed 3D acceleration engine
AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant
Supports up to 1280x1024 VGA display resolution with 24-bit true color,
non-interlaced
Supports up to 1600x1200 VGA display resolution with 16-bit high color
at 60Hz refresh rate under WindowsNT
(note)
RAMDAC Latch-up protection
Driver supporting: Windows95/98/ME/NT/2000, Linux, OS/2