Filter
Top Products
38 • Driver Installation
4
Driver Installation
To install the drivers and utility for the cPCI-6760DK/P5, please refer the
installation information in this Chapter. We provide basic information in this
manual, however, for more detail installation information, such as
non-Windows OS installation, please refer to the extensive explanation
inside the ADLINK CD. We put the chip drivers in the following directories:
Chipset driver \CHIPDRV\Chipset\440BX
VGA/AGP relative driver \CHIPDRV\VGA\SM721
LAN relative driver \CHIPDRV\LAN\100PDISK
Watchdog relative library \CHIPDRV\WDT
Hardware Doctor Utility \Utility\HWDoctor\W8378X
In this users manual, the Bus-mastering IDE driver installation is not
described because most of the Windows based OS will install those drivers
automatically.
Since Windows NT is a non plug-and-play OS, some useful tips for installing
Windows NT drivers are suggested:
1. Install the LAN driver before installing any service pack.
2. Install the VGA/AGP driver after installing the service pack. Please
make sure your service pack does support AGP, service pack 6 or
higher is recommend.
3. If Windows NT boots with a warning message, check the Event
Viewer to view the source generating the warning message. If
strange phenomena’s occur and it can’t be solved, re-install the
Windows NT service pack, then install the drivers in a different
sequence.