Filter
Top Products
Repair Information 4-45
24xx
Sensor, Paper Select Removal
1. Remove the top cover. Go to “Covers, Top Removal” on
page 4-8.
2. Remove the print unit. Go to “Print Unit Removal” on
page 4-28.
3. Turn the print unit upside down.
4. Remove the 4 small screws securing the paper select sensor to
the left side frame. Go to “Sensors Removals” on page 4-43.
Sensor, Paper Present Removal
1. Remove the top cover. Go to “Covers, Top Removal” on
page 4-8.
2. Remove the print unit. Go to “Print Unit Removal” on
page 4-28.
3. Turn the print unit upside down.
4. Remove the small screw securing the paper present sensor to
the bottom frame. Go to “Sensors Removals” on page 4-43.
Flags, Paper Present / Top-Of-Form Removal
1. Remove the lower feed roller. Go to “Roller, Lower Feed
Removal” on page 4-41.
2. Remove the paper present flag, or the top-of-form flag from the
paper guide. Go to “Sensors Removals” on page 4-43.