Filter
Top Products
1-2 Service Manual
24xx
Setup Mode
Entering Setup Mode
1. Open the operator panel cover to access layer two.
2. Press Setup to put the printer in setup mode and print the Main
Menu.
3. Press LineFeed to print a list of all the available options.
4. Select any option from the Main Menu by pressing the
corresponding button. A new menu prints each time you press a
button, displaying new selections.
5. After making your selection, the printer prints a page with the
changes shown.
Exiting Setup Mode
1. Press Set TOF until the printer returns to the Main Menu, or
press Pitch from any menu containing a Return to Main Menu
selection.
2. Press Set TOF again to exit Setup mode. New settings are
saved only when the printer exits Setup mode.
Note: If the printer runs out of paper while using Setup mode, load
more paper into the tractor pins and press Setup to continue.